If your Gorenje appliance is making unusual noises or vibrating excessively during operation горение замена подшипников, it may be a sign that the bearings need replacement. This guide will provide you with the necessary steps to replace the bearings in your Gorenje washing machine effectively.

Why Replace Bearings?

Bearings play a crucial role in the smooth operation of your washing machine https://gorenje-sup.com/. Over time, they can wear out, leading to increased friction and noise. If left unchecked, faulty bearings can cause severe damage to your appliance, leading to costly repairs.

Tools Needed

To replace the bearings, you’ll need:

• Socket set
• Screwdrivers (flathead and Phillips)
• Pliers
• Bearing puller (optional)
• Replacement bearings

Step-by-Step Instructions

1. Unplug the Washing Machine: Before starting, ensure the machine is unplugged from the electrical supply to prevent any accidents.

2. Access the Drum: Depending on your Gorenje model, you may need to remove the front or back panel. Use your screwdriver to take off the screws and carefully remove the panel.

3. Remove the Drum: To access the bearings, you will likely need to remove the drum. Unscrew the mounting screws and gently lift the drum out of the housing.

4. Inspect the Old Bearings: Once the drum is removed, check the old bearings for signs of wear or damage. If they feel rough or have excessive play, it's time for a replacement.

5. Remove the Old Bearings: Use a bearing puller if necessary to remove the old bearings. Be careful not to damage the housing during this process.

6. Install the New Bearings: Place the new bearings in the housing. Ensure they fit snugly and are properly aligned.

7. Reassemble the Drum: Carefully place the drum back into the machine and secure it with screws. Reattach any panels you removed earlier.

8. Plug in the Machine: Once everything is back in place, reconnect the washing machine to the power supply.

9. Test the Appliance: Run a short cycle to ensure that the new bearings are functioning correctly and that there are no unusual noises.

Conclusion

Replacing the bearings in a Gorenje appliance is a vital maintenance task that can prolong its life and enhance performance. With the right tools and a bit of patience, you can tackle this project confidently. Always prioritize safety and refer to your user manual for specific instructions related to your model.